ROF factory's OSRAM OSTAR 1,200lm LE UW E3B Special light for OSRAM Japan
(Show Model for CEATEC Japan )

R2X OSTAR light is not for sale.
The price would be : The Corporate retail price should be US$10,000 include insured shipping, all required documents and warranty for 100 operation hours or a year from design and manyfacturing cost. Personal cllector's retail price US$5,000 including insured shipping and warranty even on below break even cost. But collector's warranty is not for heavy duty use. CPF/CLF price available on rquest base. All prices do not include local tax, VAT, import tax or other required tax. (The retail might be reduced in case we could make more production.)
Yet, All copy right and intellectual properties reserved. Mass mediaublishing / on air fee shall be charged.
Patents pending.

 
 
   

 
Please click the above image for larger image

 

The light "R2X OSTAR" (Temporary name) was designed for OSRAM Japan's presentation on CEATEC Japan. (Semiconductor trade show held in near Tokyo Oct 2nd to 6th 2007.)

ROF factory had done ALL design works of the light. Engineering drawing, 3D CAD, 3D Rendering, converter design, conveter from the board and programing. First proto was machined by Beta Titanium. Chris of TNC machined all the parts of the light from Aerospace grade 6061 T-651 Al for the show. (12 AL parts and 1 plastic part on one light!)

This TNC (Ogaz Enterprises) version is perfect finsih as designer's drwaing, with 6061 T651 Aluminum.
Machining cost exceed US$1,000 at several sets. Machining fee for a set is aprox $3.000.

The machining cost above does not include OSTAR, all hand made electronics, all engineering fees include CAD design fee, programing fee and assembling fee.

LED : OSRAM's OSTAR LE UW E3B, bin : QY 5D (Measured approx 950lm@700mA, approx 1,200lm at 1.0A)
The brightest quality LED in the world.

Output : 4 modes plus strobes : (The program can be modified based on requeste. Exp. memory fubction, accurate temperature monitor, or "High" start as possible.)
Default setting from Off is :
30mA >
150mA >
350mA >
800-820mA
Blinks (1.0Hz)>
--Click at first Blink, second, third, 4th, or 5th blinks calls diffrent strobes in the chip.
Exp : Click at first blink calls 10Hz strobe The converter has heat sensor that prevent damage or thermal shut down. Boost mode will reduce current to half, then one quarter when converter's temperature exceed approx 80 celsius. Current will back to boost when converter's temperature drops.

Notes :
- The control chip is prtected and the program will be destroyed in case the electrobnics disassembled.
- The warranty shal be teminated if the light was disassembled.
- Please contact imediately in case the light does not work properly.

Recommended highest output is 350mA mode is approx 400-420 Torch lumen and consume less than 8 watt at entire light from four batteries. CR123 has long runtime at less than 2.1watt consumption on each battery and will drop drasticaly more than 2.2-2.3 watt.Highest output is 800+ Torch lumen. ( IF my light box is accurate, and....)
It should be 840 torch lumen if Nova Tac's dealer sample that calibrated at 120 torch lumen was accurate.
It should be 863 Torch Lumen if early under driven LEW E3B light measured by Ocean Optics was 249.3 torch lumem.

Great thanks to "fixer" of ROF factory and Chris of TNC.
Chris machined 13 types *10 sets bosy and choose 6 sets only. He finished this hard work in 3 and half weeks!

Above can be larger with click here or image.(167KB)
 
 
 





Copyrights (C) 2005 Pro Light Japan. All Rights Reserved.）